Powercall UDX7 100/200 Watt Emergency Siren (IN STOCK)

$319.99
In stock
SKU
pcudx71

The Powercall UDX7 is David Fierstiens latest 2019 version of the DX series Powercall Siren. This new siren has all 2019 microprocessor-based technology and features the highest quality circuitry and design, keeping with the industry standard. This siren has all newly updated tones, including a "PA-300" sounding Wail and Yelp, which will trigger most traffic preemption systems and gates. It also has a more defined Powercall (Warble) tone, that was taken directly from one of our GE units, the Whoop tone, a Hi-Low, Phaser, Airhorn and the always popular Intersection mode. The system also has the industries "FIRST" USB port on the front of the unit that will play an MP3 file you save on the flash drive. This is a 200-watt siren that can be wired for 100 watts using one speaker or 200 watts using two speakers. The Volume of our DX siren can also be controlled by the volume knob. This feature helps when playing a tone from the USB drive, in the instance that you may wish to lower the volume. It controls the volume of THE ENTIRE UNIT, so always keep it a full blast!

This is NFPA compliant under our highest-powered DX Series board. The DX and 6-A series units are our most powerful sirens and have all the features that you can ask for in an electronic siren.  The powercall tone in the siren is a unique tone that gets people's attention better than your standard siren sounds, making them react to your apparatus faster. Never settle for the imitation by the other manufacturers, "ALWAYS ASK FOR THE FIERSTIEN BRAND!"

The Powercall UDX7 includes the following tones:
 
1) Wail (All-New, Sounds like a PA-300)
2) Yelp (All-New, Sounds like a PA-300)
3) Hi-Low
4) Powercall (Warble) Re-created
5) Whoop
6) Phaser
7) Intersection
8) Air Horn
9) USB (MP3 Input)

Most any 100 Watt siren speaker will work on our sirens.  Our best recommendation is the Powercall 6DX 100 100 Watt siren speaker. Our siren speakers are specifically designed to handle our Powercall tone and all other siren tones. They have 2-year warranty also. You can run 1 speaker to obtain 100 watts or run 2 speakers and run a powerful 200 watts! 

NFPA Compliant under our DX Series 775-2 Board and our Highest Powered 6-A Board Certification. 2019 Microprocessor Controlled. Our new wail and yelp tones adhere to the cycling and frequency requirements outlined in SAE J1849 so they can be recognized by the general public.

2 Year Parts warranty. Serviced directly through Powercall Sirens Tech Support. Requires 1 or 2, 11-ohm siren speakers sold individually.

The exact dimensions of the Powercall UDX7 are as follows:
From Left to Right, 6.25"
From Top to Bottom, 2.3"
From Front to Back 6.4 Plus wiring strip 

The screw holes from back to the hole are 3". Contact David Fierstien for inquiries about becoming a
re-seller for our units. Minimums must be met and an opening dealer order must be placed to become a Powercall dealer. Contact support@powercallsirens.com for more info!
 
 
 

 
 
Copyright © 2020 Powercall Sirens, LLC "The Fierstien Brand" All rights reserved. Developed & Managed by MageSpark